Clips causing dents in upholstered door panel
Posted: Sun Sep 13, 2020 9:40 pm
by Kysunsetpat
I have covered a door panel for our 1932 Ford Coupe. It looked good until we inserted the clips . We inserted them through the holes in back of panel board. Any suggestions how to bring these back out?
Re: Clips causing dents in upholstered door panel
Posted: Sun Sep 13, 2020 10:22 pm
by John
Yeah that happens because when you press the clips in it concaves the head and causes the dimple. I dont recommend using those types of clips on door panels.
I always use Auveco 808 frog leg clips. They never have this problem.
https://www.albrightssupply.com/trim-pa ... Click=3957
Re: Clips causing dents in upholstered door panel
Posted: Thu Sep 17, 2020 4:36 pm
by Kysunsetpat
Thanks, John. For some reason we couldn't use those clips in these particular places on the door panel.
Re: Clips causing dents in upholstered door panel
Posted: Thu Sep 24, 2020 3:52 pm
by John