Page 1 of 1
Biggest job
Posted: Sat May 09, 2020 11:52 am
by miket
My biggest job to date. 32' Albermarle full curtains.
Re: Biggest job
Posted: Sat May 09, 2020 8:44 pm
by John
Very nice job! That probably was not easy.
Re: Biggest job
Posted: Sat May 09, 2020 9:19 pm
by vicstric
Balls!
Re: Biggest job
Posted: Sun May 10, 2020 12:55 pm
by miket
@John Thanks! It wasn't too bad. The worst part was the small front screen and on the side if you look in the window you can see the bottom of a long storage bin that runs the length of the top. It is on both sides and there is about 3 inches between the bin and the aluminum tubing. Much fun patterning and hanging track.
That is the reason for the flaps at the top of the panels. You can un zip the whole panel from that flap and not have to fight the whole panel up in that gap. Then you can remove zipper flaps or leave them in place, which is what I would do as they are a b!@#$ to get up there. loll
Thanks @vicstric
Re: Biggest job
Posted: Sun May 10, 2020 1:17 pm
by Adam12
Nicely done!