• User avatar
  • User avatar
  • User avatar
By Zot
#9802
Hi folks! :wave: I'm replacing the webbing on a daybed that previously had 2 inch elastic webbing underneath decorative leather straps. The webbing had sagged after about 10 years of use. I thought I'd give it a bit more life by using black and white herringbone webbing, which I was told was the strongest. But despite pulling it very tight before stapling, as soon as I lay on the daybed the webbing stretched and became loose. Is this normal? Should I be using elastic webbing instead?

Image
[imag]daybed.png[/img]
Attachments
daybed.png
daybed.png (897.64 KiB) Viewed 10655 times
normal_black and white.jpg
normal_black and white.jpg (28.51 KiB) Viewed 10655 times
By Zot
#9837
Cheers BigRig, I'm trying black and white webbing in place of the black elastic webbing that was there before, as I read it's stronger. The webbing seems more widely spaced than on a normal sofa. I'll see how it goes with a stretcher.
User avatar
By BigRig
#9838
@Zot,

I have used some webbings and they are pretty strong so just make sure you tighten it up good and you are good to go. Now here is the question of the day, Are the staples holding it down on either end as strong as the webbing :stuck_out_tongue_winking_eye: :stuck_out_tongue_winking_eye: :hushed:
John, Zot liked this
By Zot
#9908
Thanks for the advice folks, a stretcher seemed to make all the difference! I used this type, which worked fine one-handed, though the peg broke first time and I had to replace it with a metal rod. I pre-stretched the webbing by winding it around the daybed frame and lying on it for a week. I also stapled the leather strips on top before putting any weight on the stapled webbing – I think they add a bit of support. Everything's nice and tight now!

Image
John Long, John liked this
First Auto Upholstery Project

The seat looks amazing! I hope to be able to do th[…]

New member from Sacramento

Hi everyone, My name is German, and I run a leath[…]

Lawnmower grass catcher

Shade sail materials are tough and breathable

The clear plastic that goes over leds

Hey guys im new to working with Led lights, im won[…]